Load Hugger Cargo Control

• Lightweight, easy to handle
• Soft and wide – does not damage costly cargo
• Flexible, conforms to and safely controls the load
• Large selection of end fastenings, winches, cam buckles and ratchets
• Multiple styles of webbing and strength classes
• Meet U.S. DOT, FMCSA (Federal Motor Carrier Safety Administration), and CVSA (Commercial Vehicle Safety Alliance) requirements.

Download our Load Hugger Cargo Control catalog Find a Distributor

Type A Assemblies

One-piece assemblies for use without end fittings. Length measured from ratchet mandrel to end of webbing.

Type B Assemblies

Two-pieces assemblies with one piece attached to the ratchet, and the other end is adjustable. Numerous end fittings are available to handle any requirements. See our catalog for more information and end-fitting options.

Series 1,000

1” Wide Polyester Webbing
Ultimate strength: 2,100 lbs.^*
Working Load Limit: 700 lbs.^*
*Series 1,000 Exception: Series 1,000 Ratchet Assembly with Flat Hooks,
Ultimate Strength is 1,000 lbs., and working load limit is 330 lbs.

Series 5,000

2” Wide Polyester Webbing
Ultimate strength: 5,000 lbs.
Working Load Limit: 1600 lbs.

Series 10,000

2” Wide Polyester Webbing
Ultimate strength: 10,000 lbs.
Working Load Limit: 3,300 lbs.

Series 15,000

3” or 4" Wide Polyester Webbing
Ultimate strength: 15,000 lbs.
Working Load Limit: 5,000 lbs.

Type B Measurement - FIXED END

2" Wide Assemblies: 16' long
1" Wide, 3" Wide, and 4" Wide Assemblies: 18" long
Note: Chain Anchor adds 14” to fixed end length

Winch Straps

3" & 4" Wide Polyester Winch Straps

• Load Hugger Winch Straps are designed for winches on flatbed trucks and trailers.
• Sling protection and corner protectors extend life of Load Huggers.
• Ultimate breaking strength 15,000 lbs.
• Working load limit 5,000 lbs.
• Standard assemblies in 27' or 30' lengths.
• To order a non-standard strap, specify width, length, and end fitting.