Roughneck^™ Wire Mesh Slings

Under normal usage, wire mesh slings will eventually need repairs. Lift-All can perform this service and re-certify all sling brands at a relatively low cost. Wire mesh slings that are repaired are guaranteed to meet or exceed original specifications. Wire mesh slings should be removed from service and/or repaired under the following conditions:

• A broken weld or brazed joint along the sling edge.
• A broken wire in any part of the mesh.
• Reduction in wire diameter of 25% due to abrasion or 15% due to corrosion.
• Lack of flexibility due to distortion of the mesh.
• Visible distortion or wear of either end fitting.
• Cracked end fitting.

Download our Mesh Slings catalog Find a Distributor

• Click to View / Hide Capacities

  Wire Mesh Width (in.)	Rated Capacity* (lbs.)
  	Vertical	Choker	Basket
  10 Gage - Heavy Duty
  2	2,300	2,300	4,600
  3	3,500	3,500	7,000
  4	4,800	4,800	9,600
  6	7,200	7,200	14,400
  8	9,600	9,600	19,200
  10	12,000	12,000	24,000
  12	14,400	14,400	28,800
  14	16,800	16,800	33,600
  16	19,200	19,200	38,400
  18	21,600	21,600	43,200
  20	24,000	24,000	48,000
  12 Gage - Medium Duty
  2	1,600	1,600	3,200
  3	2,400	2,400	4,800
  4	3,200	3,200	6,400
  6	4,800	4,800	9,600
  8	6,400	6,400	12,800
  10	8,000	8,000	16,000
  12	9,600	9,600	19,200

  NOTE:The choker fitting must not be positioned against a load edge or directly on the triangle fitting.

  ^*Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30°. Refer to the Effect of Angle chart in the General Information section of our catalog.

Roughneck^™ Chain Mesh Slings

• Each sling is permanently stamped with capacity and serial number for traceability.
• Steel construction resists abrasion and cutting.
• Each sling proof-tested and certified.
• Width of mesh helps to balance and control loads.

Download our Mesh Slings catalog Find a Distributor

• Click to View / Hide Capacities

  Chain Size (in.)	Parts of Chain	Sling Width (in.)	Rated Capacity* (lbs.)
  			Vertical	Choker	Basket
  7/32	3	1-1/2	5,000	5,000	10,000
  	4	2	6,700	6,700	13,400
  	5	2-1/2	8,400	8,400	16,800
  	6	3	10,000	10,000	20,000
  9/32	3	2-1/8	8,400	8,400	16,800
  	4	2-3/4	11,000	11,000	22,000
  	5	3-3/8	14,000	14,000	28,000
  	6	4	16,800	16,800	33,600
  3/8	3	3-1/4	17,000	-	34,000
  	4	4-3/8	22,700	-	45,400
  	5	5-3/8	28,400	-	56,800
  	6	6-1/2	34,000	-	68,000
  1/2	2	3	19,200	-	38,400
  	3	4-1/2	28,800	-	57,600
  	4	6	38,400	-	76,800

  ^*Do not exceed rated capacities. Sling capacity decreases as the angle from horizontal decreases. Slings should not be used at angles of less than 30°. Refer to the Effect of Angle chart in the General Information section of our catalog.